| 1. | Does not have a preset value and therefore the
这样的属性没有预设值，因此 |
| 2. | All inputs are dynamic ; preset values are not needed
所有输入都是动态的，不需要预先设定值。 |
| 3. | Gets the preset value of an expression
获取表达式的预设值。 |
| 4. | Contains the preset value of an expression , should one exist
包含表达式的预设值（如果存在一个这样的值） 。 |
| 5. | The installer accepts information dynamically , eliminating the need for preset values in the environment
安装程序动态地接受信息，减少预先设置环境值的必要性 |
| 6. | The preset value of this expression , or a null reference nothing in visual basic if not assigned
此表达式的预设值，如果没有赋值，则为空引用（在visual basic中为nothing ） 。 |
| 7. | A crowded car with a load near a preset value will bypass hall calls in order to maintain maximum operation efficiency
如轿内挤满乘客，或负载接近预定值，为保持最大运行效率，该轿将自动越过召唤层站。 |
| 8. | Ensure that the preset values are correct for the installation , and alter those that might need changing , such as the block size shown in figure 26
保证预先设定的值对于安装是正确的，并改变那些需要改变的地方，比如图26中所示的block size 。 |
| 9. | Transmit pulse signals of the proximity switch or photoelectric sensor to monitor , and contrast them with preset values , accordingly judge that if speed is normal
利用近接开关或光电开关所?集到的脉冲讯号，送到监视器和预先设定值加以对比，以显示移动速度是否正常。 |
| 10. | When the data recorded reaches the preset value , it ' ll generate a low electrical signal to make the led emitting as an alert signal until being reset manually by pressing the reset button
当计数值达到预定值时,它产生一个低电平通过发光二极管报警，直到人工使用复位按键复位后报警才停止。 |
